by RichardF » Sun Jun 17, 2007 10:05 am
Scott,
since a too fine segmentation will create a too long program I think you could try the double or triple of the arc length in degrees :
i.e.:
arc length = 90 degrees = 180 segments or
arc length = 90 degrees = 270 segments
perhaps as input between 2 and 5 as factor.
The milled result will show what is the best value.
Thank you,
Richard
Last edited by
RichardF on Sun Jun 17, 2007 10:17 am, edited 1 time in total.