#4014

NCPlot questions or comments

#4014

Postby SMAT » Tue Oct 07, 2008 11:09 am

hi Scott,

I have some problem when I used and set #4014

this system variable come back any time to 67 ???

I used NcPlot V2.05 and V2.06BETA

I think it's ok with V2.03

Can you help me please ?

tanks

Mathieu
SMAT
 
Posts: 39
Joined: Thu Aug 31, 2006 3:56 pm
Location: Quebec / Canada

Postby scottmartinez » Tue Oct 07, 2008 1:26 pm

Hi Mathieu,

Beginning with NCPlot v2.05, system variables #4001 - #4020 are the pre-read versions of variable #4201 - 4220. So variable #4014 now contains the status of G-Code group 14 which is G66/G67.

Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm

Postby SMAT » Tue Oct 07, 2008 1:48 pm

Hi Scott,

In the "milling" fanuc Control manual, G-code group 14 is G54 to G59.(workpiece coordinate system)

And G66/G67 is group 12 !!!

???

can you confirm that ?
SMAT
 
Posts: 39
Joined: Thu Aug 31, 2006 3:56 pm
Location: Quebec / Canada

Postby scottmartinez » Tue Oct 07, 2008 1:56 pm

Mathieu,

The G-Code groupings in NCPlot are actually based on a Mitsubishi control, which I thought was the same as Fanuc. These are the groups as NCPlot recognizes them:

#4201 Group 1 G0, G1, G2, G3
#4202 Group 2 G17, G18, G19
#4203 Group 3 G90, G91
#4205 Group 5 G94, G95
#4206 Group 6 G20, G21
#4207 Group 7 G40, G41, G42
#4208 Group 8 G43, G44, G49
#4209 Group 9 G70 ? G79, G81 ? G89, G80
#4210 Group 10 G98, G99
#4211 Group 11 G50, G51
#4212 Group 12 G54 ? G59, G54.1
#4214 Group 14 G66, G67
#4216 Group 16 G68, G69
#4218 Group 18 G15, G16
#4219 Group 19 G50.1, G51.1

Can you tell me what the groups are for Fanuc?

Thanks,
Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm

Postby SMAT » Tue Oct 07, 2008 2:11 pm

Scott

I send you, by E-Mail, a list of G-code group for fanuc

tanks
SMAT
 
Posts: 39
Joined: Thu Aug 31, 2006 3:56 pm
Location: Quebec / Canada


Return to Questions / Comments

Who is online

Users browsing this forum: No registered users and 3 guests

cron