alarm offset number

NCPlot questions or comments

alarm offset number

Postby SMAT » Tue Dec 04, 2012 10:41 am

Hi Scott,
I use NcPlot 2.3 beta 2 and when I plot the program It generate alarm (PLEASE SPECIFY AN OFFSET NUMBER) when reading this line :

G90G10L12P763R0.01

But this line is ok(Fanuc)

I think you used a Mitsubishi control and it's probably correct to call an alarm, but is this possible to "jump" this check ?

Thanks
SMAT
 
Posts: 39
Joined: Thu Aug 31, 2006 3:56 pm
Location: Quebec / Canada

Re: alarm offset number

Postby scottmartinez » Thu Jan 10, 2013 12:11 pm

Support for G10 can be disabled by going into your machine configuration's "G/M Codes" page and removing G10 from the G-Code macro list.

You could also modify the macro "G100.PRG" in your configuration folder to support your particular G10 command format. Or, you can add "M99" to the beginning of the macro to effectively disable it.

Hope this helps,
Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm

Re: alarm offset number

Postby SMAT » Fri Jan 11, 2013 11:24 am

Thanks !!
SMAT
 
Posts: 39
Joined: Thu Aug 31, 2006 3:56 pm
Location: Quebec / Canada


Return to Questions / Comments

Who is online

Users browsing this forum: No registered users and 5 guests

cron