Missing lines

NCPlot questions or comments

Missing lines

Postby Pysiek » Mon May 20, 2013 11:56 am

I just downloaded the trial version and when I loaded my dxf file it shows 2 lines missing. I assume there are some settings that need to be changed. But where? Please check the attached image for reference. I marked the locations of missing lines in red.
Attachments
gcode.jpg
gcode.jpg (19.72 KiB) Viewed 16312 times
Pysiek
 
Posts: 4
Joined: Mon May 20, 2013 11:41 am

Re: Missing lines

Postby scottmartinez » Mon May 20, 2013 5:00 pm

Can you post or email the DXF drawing to me?

Thanks,
Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm

Re: Missing lines

Postby Pysiek » Tue May 21, 2013 4:30 pm

Sure. Sorry that I did it so late but I haven't received any email that somebody posted an answer here. The .dxf extension is not allowed to be posted here. Please give me your emial
Pysiek
 
Posts: 4
Joined: Mon May 20, 2013 11:41 am

Re: Missing lines

Postby scottmartinez » Tue May 21, 2013 4:42 pm

You can send it to scottmartinez@ncplot.com

Thanks,
Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm

Re: Missing lines

Postby Pysiek » Tue May 21, 2013 4:44 pm

Just send it to you
Pysiek
 
Posts: 4
Joined: Mon May 20, 2013 11:41 am

Re: Missing lines

Postby scottmartinez » Wed May 22, 2013 4:25 pm

I took a look into this and it seems to be a problem within NCPlot. It looks like the polyline is not being closed properly. If you can explode the polyline before you save the drawing then that should import fine.

Thanks,
Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm

Re: Missing lines

Postby Pysiek » Mon May 27, 2013 11:36 am

OKay Scott I will try that. One more time sorry for the late reply but I have forgot to check the option to notify me each time somebody will post reply to it.
Pysiek
 
Posts: 4
Joined: Mon May 20, 2013 11:41 am


Return to Questions / Comments

Who is online

Users browsing this forum: No registered users and 2 guests

cron