Bug with the machine coordinate variables eg. #5001....

[Armageddon]

Hi Scott,

think there is a bug in NCPlot.

Example:

G0 X30.0 Z0.0
G65 P1234 X-2.0 Z-50.0

#5001 should be 30.0 when i call the subprogramm O1234 with G65.
#5001 will be set to -2.0 when NCPlot enter subprogramm O1234.
But #5001 should be 30.0 because X-2.0 is only a value for #24 in subprogramm O1234

Hope you understand what i mean.

Best regards
Arma

[scottmartinez]

Armageddon,

Yes, that is definately a bug. I'll take a look at it.

Thanks,
Scott