Bug with the machine coordinate variables eg. #5001....
Posted: Fri Apr 28, 2006 10:11 am
Hi Scott,
think there is a bug in NCPlot.
Example:
G0 X30.0 Z0.0
G65 P1234 X-2.0 Z-50.0
#5001 should be 30.0 when i call the subprogramm O1234 with G65.
#5001 will be set to -2.0 when NCPlot enter subprogramm O1234.
But #5001 should be 30.0 because X-2.0 is only a value for #24 in subprogramm O1234
Hope you understand what i mean.
Best regards
Arma
think there is a bug in NCPlot.
Example:
G0 X30.0 Z0.0
G65 P1234 X-2.0 Z-50.0
#5001 should be 30.0 when i call the subprogramm O1234 with G65.
#5001 will be set to -2.0 when NCPlot enter subprogramm O1234.
But #5001 should be 30.0 because X-2.0 is only a value for #24 in subprogramm O1234
Hope you understand what i mean.
Best regards
Arma