How do i get DNC working

Share and discuss Machine Configurations here

How do i get DNC working

Postby Kolobok » Mon Apr 09, 2007 10:03 pm

How do i get DNC working.I went Configurations true and it tells me transfer completed,but i can not get any thing on my machine.Thanks
Kolobok
 
Posts: 13
Joined: Fri Dec 01, 2006 11:40 am

Postby scottmartinez » Tue Apr 10, 2007 7:05 am

Hi,

I would first check to see if your cable is working. Try sending from the control back to the PC and see if you get anything. Go to the menu DNC and click "Receive", then send a program out of the control. If you don't receive anything, then check the cable.

Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm

Postby Kolobok » Tue Apr 10, 2007 12:38 pm

Yes I am able to receive prog. but not send.Maybe because I have more then one machine on the line with the swich in between?
Kolobok
 
Posts: 13
Joined: Fri Dec 01, 2006 11:40 am

Postby scottmartinez » Tue Apr 10, 2007 12:54 pm

What control is this you are trying to send to? Does the control require any special characters or commands? Can you remove the switch and connect your PC directly to the machine?

Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm

Postby Kolobok » Tue Apr 10, 2007 5:07 pm

Fanuc 21T, Fanuc 6T, I tried to connect direct to the first Machine (SNK -Suit12 Fanuc 21t ) in line, no luck so far. the guy befor me used SmartCam DNC and I copied all the settings from there, it does have more settings, but i am not sure(Do ineed them all?). Like i sad receiving no problem. Most of our machines are on ScanDisk. Thanks
Kolobok
 
Posts: 13
Joined: Fri Dec 01, 2006 11:40 am

Postby scottmartinez » Tue Apr 10, 2007 5:20 pm

NCPlot will send the file exactly as you see it, your control may be looking for a header sequence to initiate the transmission. I'll have to check on this.

Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm

Postby Kolobok » Thu Apr 12, 2007 7:32 am

I got it. We used to send a prog. and then go to the machine to receive it, but now i have to get the machine to start to receive and then go and send. With our old dnc soft the file coud sit for a day in a line until machine has respondet. Ncplot better option to work with the file. Are there any way we coud set (Ncplot) up so wait until machine starts to receive the file?
Kolobok
 
Posts: 13
Joined: Fri Dec 01, 2006 11:40 am

Postby scottmartinez » Thu Apr 12, 2007 9:00 am

Yes, I've got this feature on my list. Glad you figured it out!

Thanks,
Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm


Return to Configurations

Who is online

Users browsing this forum: Bing [Bot] and 1 guest

cron