Setting up for canned cycle.
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Thu Apr 16, 2009 8:15 pm
by peterd
I'm having trouble understanding how to back plot my canned cylce. How do I set up the config properly? Any help would be great.
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Fri Apr 17, 2009 2:53 pm
by scottmartinez
Need a little more info... What configuration are you using? Which canned cycle are you tring to run?
Scott
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Sun Apr 19, 2009 3:20 pm
by peterd
Hi Scott,
Using mill for a router.
Canned cycles G81/82/83 on a drill block.
Peter.
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Mon Apr 20, 2009 9:29 pm
by scottmartinez
Peter,
You shouldn't have to do anything special to get the canned cycle to show, it should work already... Can you pos a sample program that you are having trouble with?
Thanks,
Scott
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Mon Apr 20, 2009 9:40 pm
by peterd
Trying to get our post set up too so may be some rogue code in here
;PROGRAM - TEST4.NC
;DATE - APR-20-2009
;TIME - 7:50 AM
;T1 - 9 SPINDLE DRILL BLOCK - 0 - 0 - D1.000mm
;T2 - 9.6MM DIA COMPRESSION - 3 - 3 - D9.550mm
;TOOL PROBING
(DPP,10,155,300,1)
G29G71G90
M6T1.0
G79G0Z320.
G79G0X4003.Y1609.
G72Z150.E1001
G79G0Z320.
E1002=NE G (E1001)
(RQP,@T_ACTIVE,@T_OFFSET,L E1002)
(DPP,10,155,300,1)
G29G71G90
M6T2.3
G79G0Z320.
G79G0X4003.Y1609.
G72Z150.E1001
G79G0Z320.
E1002=NE G (E1001)
(RQP,@T_ACTIVE,@T_OFFSET,L E1002)
G71
M416
M417
G27
G79G00Z320.
M88
G16 X Y
(UAO,0)
(UIO,Z(@MATERIAL))
(UTO,0,X-35.5,Y332.6)
G79G00Z320.
M06T25.25
M06T24.24
M06T23.23
M06T22.22
M06T21.21
M06T26.26
M06T27.27
M06T28.28
M06T29.29
G16 X Y
G90G00X50.Y50.
Z50.
Z5.
M98P1001
G90Z50.
X690.Y338.
M88
G79G00Z320.
M01
M06T2.3;9.6MM DIA COMPRESSION
G16 X Y
M03S18000
G90G00X717.998Y634.279
Z50.
Z10.
G94G01Z0.F2000.
G2X708.875Y585.964Z-18.R132.501F12000.
X717.998Y634.279R132.501
X708.875Y585.964R132.501
G00Z20.
X494.154Y919.268
Z10.
G01Z0.F2000.
X444.699Z-18.F12000.
X290.598
Y1086.499
X494.154
Y919.268
X444.699
G00Z20.
X789.459Y933.798
Z10.
G01Z0.F2000.
Y983.253Z-18.F12000.
Y1084.077
X1315.095
Y933.798
X789.459
Y983.253
G00Z50.
M05S0
G79G00Z320.
M316
M317
M30
O1001 ;TEST4-SUBO1001
X142.5Y386.6
G94G01Z-18.F2000.
G00Z5.
X302.5
G01Z-18.
G00Z5.
X462.5
G01Z-18.
G00Z5.
X622.5
G01Z-18.
G00Z5.
X782.5
G01Z-18.
G00Z5.
M88
M06T24.24
M06T23.23
M06T22.22
M06T21.21
M06T26.26
M06T27.27
M06T28.28
M06T29.29
X110.5Y418.6
G01Z-18.
G00Z5.
X270.5
G01Z-18.
G00Z5.
X430.5
G01Z-18.
G00Z5.
X590.5
G01Z-18.
G00Z5.
X750.5
G01Z-18.
G00Z5.
M88
M06T23.23
M06T22.22
M06T21.21
M06T26.26
M06T27.27
M06T28.28
M06T29.29
X78.5Y450.6
G01Z-18.
G00Z5.
X238.5
G01Z-18.
G00Z5.
X398.5
G01Z-18.
G00Z5.
X558.5
G01Z-18.
G00Z5.
X718.5
G01Z-18.
G00Z5.
M88
M06T22.22
M06T21.21
M06T26.26
M06T27.27
M06T28.28
M06T29.29
X46.5Y482.6
G01Z-18.
G00Z5.
X206.5
G01Z-18.
G00Z5.
X366.5
G01Z-18.
G00Z5.
X526.5
G01Z-18.
G00Z5.
X686.5
G01Z-18.
G00Z5.
M88
M06T21.21
M06T26.26
M06T27.27
M06T28.28
M06T29.29
X14.5Y514.6
G01Z-18.
G00Z5.
X174.5
G01Z-18.
G00Z5.
X334.5
G01Z-18.
G00Z5.
X494.5
G01Z-18.
G00Z5.
X654.5
G01Z-18.
G00Z5.
X142.5Y546.6
G01Z-18.
G00Z5.
X302.5
G01Z-18.
G00Z5.
X462.5
G01Z-18.
G00Z5.
X622.5
G01Z-18.
G00Z5.
X782.5
G01Z-18.
G00Z5.
M88
M06T26.26
M06T27.27
M06T28.28
M06T29.29
X110.5
G01Z-18.
G00Z5.
X270.5
G01Z-18.
G00Z5.
X430.5
G01Z-18.
G00Z5.
X590.5
G01Z-18.
G00Z5.
X750.5
G01Z-18.
G00Z5.
M88
M06T27.27
M06T28.28
M06T29.29
X78.5
G01Z-18.
G00Z5.
X238.5
G01Z-18.
G00Z5.
X398.5
G01Z-18.
G00Z5.
X558.5
G01Z-18.
G00Z5.
X718.5
G01Z-18.
G00Z5.
M88
M06T28.28
M06T29.29
X46.5
G01Z-18.
G00Z5.
X206.5
G01Z-18.
G00Z5.
X366.5
G01Z-18.
G00Z5.
X526.5
G01Z-18.
G00Z5.
X686.5
G01Z-18.
G00Z5.
M88
M06T29.29
X14.5
G01Z-18.
G00Z5.
X174.5
G01Z-18.
G00Z5.
X334.5
G01Z-18.
G00Z5.
X494.5
G01Z-18.
G00Z5.
X654.5
G01Z-18.
G00Z5.
M99
Peter.
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Mon Apr 20, 2009 10:12 pm
by scottmartinez
I didn't see any G81,G82, etc. cycles in your program, plus I got some errors when trying to run it. Where in the program are you having trouble?
Scott