Machinist Toolbox

Ask for help with NCPlot problems here

Machinist Toolbox

Postby dhorton » Tue Apr 17, 2007 5:30 pm

Scott,

I have Machinist Toolbox on my computer but it did not link when I installed NCPlot. Is there a way to manually do this?

Donnie
dhorton
 
Posts: 6
Joined: Tue Apr 17, 2007 5:16 pm

Postby scottmartinez » Tue Apr 17, 2007 9:30 pm

Hi Donnie,

You must have version 9.x of the Machinist Toolbox ActiveX. Note that this must be the *ActiveX* version and not the standalone version of Machinist Toolbox. Is this what you have?

Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm

Postby dhorton » Wed Apr 25, 2007 11:50 am

Thanks Scott,

I have version 7. something, guess it's time to upgrade.
Donnie
dhorton
 
Posts: 6
Joined: Tue Apr 17, 2007 5:16 pm

Postby dhorton » Thu May 03, 2007 2:32 pm

Scott,

I upgraded to v9.21, uninstalled then reinstalled NCPlot but it did not link to Machinist Toolbox, what do I need to do?
Donnie
dhorton
 
Posts: 6
Joined: Tue Apr 17, 2007 5:16 pm

Postby scottmartinez » Thu May 03, 2007 4:55 pm

Hmmmm..... I'll have to check on this and let you know what I find. I'm not sure exactly what version I have, yours may even be newer.

Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm

Postby scottmartinez » Sun May 06, 2007 3:15 pm

Donnie,

OK, I've got this fixed now. NCPlot was referencing a particular version of Machinist ToolBox. I've fixed it so that it should work with any version of the ActiveX. The bad news is that this fix didn't make into the last update, but will be in the next one.

Thanks,
Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm


Return to Help

Who is online

Users browsing this forum: No registered users and 2 guests