Missing Text to G-Code Command

Ask for help with NCPlot problems here

Missing Text to G-Code Command

Postby cncshop » Thu Feb 25, 2010 5:20 pm

Hi,
I have the beta version running on winxp and no problems. That is until today. I cannot find the text to g-code command under the tools menu. I even tried to set a shortcut key for it and it's a no go. Do I have to give up the beta version and install the last one? I love the xt to code, along with the address adjustment tools I am able to engrave on a diameter in an old haas indexer, way cool.
-Don
cncshop
 
Posts: 1
Joined: Thu Feb 25, 2010 5:07 pm

Re: Missing Text to G-Code Command

Postby scottmartinez » Sat Feb 27, 2010 10:49 am

Hi Don,

The Text to G-Code and a few other tools are not available when you have NCPlot set to Lathe mode. To switch back to mill mode either switch to a mill configuration or go into the machine configuration and change back to the mill machine type.

Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm


Return to Help

Who is online

Users browsing this forum: No registered users and 4 guests

cron