canned cycles

Ask for help with NCPlot problems here

canned cycles

Postby JOHNCAP » Sun May 01, 2011 5:35 am

Hi,
When using a canned cycle is it possible, when back plotting, to view each individual pass as opposed to just the finished profile.

Thanks for any help

JohnCap
JOHNCAP
 
Posts: 1
Joined: Sat Apr 30, 2011 8:56 pm

Re: canned cycles

Postby scottmartinez » Wed May 04, 2011 1:52 pm

Hi John,

When backplotting a lathe program NCPlot will not show the roughing passes for canned cycles, only the finished profile.

Thanks,
Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm


Return to Help

Who is online

Users browsing this forum: No registered users and 2 guests

cron