Won't plot arcs or circles

Ask for help with NCPlot problems here

Won't plot arcs or circles

Postby HAMMER » Tue Aug 02, 2011 12:10 pm

I'm trying to use the software as a means to get dxf files from my old tape files. The tape files are for a Panasonic laser. It shows the straight lines and the lead-in which are straight but not the circular holes. Instead it asks me why the lead-ins and lead-out are different and if it should ignore them then it plots large circles much larger than the part. The machine type I'm running the software under is a waterjet as laser was not a choice. What should my seetings be to get the software to plot the arc accurately? I'm uploading a sample tape file. Thanks.
HAMMER
 
Posts: 1
Joined: Thu Jul 28, 2011 6:41 pm

Re: Won't plot arcs or circles

Postby scottmartinez » Tue Aug 02, 2011 1:14 pm

I didn't see your sample file... if you can't post it here then you can send it to me directly at scottmartinez@ncplot.com

Thanks,
Scott
User avatar
scottmartinez
Site Admin
 
Posts: 215
Joined: Sat Mar 11, 2006 8:49 pm


Return to Help

Who is online

Users browsing this forum: No registered users and 1 guest

cron