Hi Scott,
When I use a canned cycle like G84 I have some problem :
this is my prog:
Z1.25
G98G81Z-35.5R.5F5.
X1.Y1.
X2.Y2.
and it execute this:
Z1.25
G98G81Z-35.R.0F5.( Z-35.0 ??? must be -35.5 R0.???must be R.5)
(RETRACT AT 1. must be 1.25)
X1.Y1.
X2.Y2.
tanks
Smat